One Sheet Summary
CMS PP1 Cable Interface Board
The PP1 board provides physical mounting and electrical feedthrough, with monitoring, between
LIC (Low Inductance Cable) and MSC (Multi-Service Cables).
The LIC cables carry high-voltage bias, high-current power and low level sensing and thermometry.
The Printed Circuit Board is fabricated as 10 layers, 5 of which are planes. The board is 186mm x 158mm
and approximately 2.5mm thick.
The high voltage lines will be rated for 600V.
The high current lines will be rated for 6, 14 & 20A.
Monitoring some of these signals is provided by a 120 pin connector.